Hakko FR410-53 ESD-Safe High Power Desoldering Station | Pencil-Type desoldering handpiece

As the design of PCBs evolve, the need for higher power desoldering tools with a wide arrange of nozzle configurations grows. Ships via UPS

• Delay timer to prevent premature release of the vacuum system before solder has cleared the heater and is captured in the solder collection chamber
• Large easy to read display that includes a vacuum level indicator to let you know if there are restrictions building that will need to be cleaned out
• 3-user programmable presets
• Process control password lockout to prevent any unauthorized changes to the system's operation or setup
• Each handpiece has a easy access solder collection chamber that is simple to clean
• Easy to change heater cartridge with HAKKO Composite Ceramic technology
• Independent nozzle, which provides a low cost of operation
• Basic maintenance kit with a variety of basic cleaning tools and replacement filters.

Specifications
•Input Voltage: 120VAC 50/60 Hz
•Temperature Range: 620° - 850°F (330°C - 450°C)
•Temperature Stability: ±9°F (±5°C) at idle
•ESD Safe

Station
•Vacuum Generator: Pump - Double Cylinder
•Vacuum Pressure (max):80 kPa / 600 mm Hg (24 in. Hg)
•Suction Flow: 15 L/min
•Temperature Control : Microprocessor control using closed-loop sensor
•Temperature Presets: 3-User Programmable
•Sleep Enabled
•Auto Power Off Safety
•Low Temp Alarm
•Process Control Lockout (Password Protected)
•Size: 6.5 x 5.4 x 9.6 in. 165 x 137 x 244 mm
•Weight: 10.6 lb. (4.8 kg)

FR-4102-81 (Pencil-Style) Handpiece Spec
•Nozzle-to-Ground Resistance < 2 ohms
•Nozzle-to-Ground Potential < 2 mV
•Heater: HAKKO Composite Ceramic
•Nozzles: N61 Series
•Standard Nozzle (included): N61-05 (1.0 mm / 0.04 in.)
•Cord Length 4 ft. (1.2 m)
•Total Length: 8.1 in. (206 mm)
•Weight: 0.38 lb. (170 g)