Tronex 5521 Large Oval-Relief Semi-Flush Cutter | ESD-Safe Cushion Grips | 32-15 AWG | 5″
Tronex 5521 Large Oval-Relief Semi-Flush Cutter | ESD-Safe Cushion Grips | 32-15 AWG | 5″
$63.00
Tronex 5521
This hardened steel tool, with a longer and wider head, is ideal for cutting cables and wire harnesses. The lower-profile head allows for greater access into hard-to-reach areas. Precision ground cutting edges and fine set screw-stop prevent sharp edges from dulling even when strong cutting force is applied. Make crisp cuts at the tip and all along the cutting edge. Larger head for greater cutting capacity.
Tronex 5521 Features
• Cut soft wire 32-15 AWG
• Semi-flush cut
• Larger head for greater cutting capacity
• Semi-flush cut for general purpose cutting
• Precision ground for a sharper cutting edge
• Fine, set screw stop prevents sharp edges from dulling
• Non-protruding leaf spring will not “catch”
• Blue ESD-safe double-sheathed cushion grips
• Satin, glare resistant finish is easier on the eyes
Recommended Applications
• Electronics
• Jewelry Making
• Wire Harness Work
Tronex 5521 Specifications
• Cutting capacity: soft wire 32-15 AWG .008″ – .055″ (0.2mm – 1.4mm)
• Overall length: 5″
• ESD safe (RTT Resistance: 11 ohms tested per ANSI/ESD STM11.13 Two-Point Probe, resistance measurement for static dissipative materials)
• Option: Longer, ergonomic handle 7″ (Part No. 7521)
| Weight | 1.2 lbs |
|---|---|
| Dimensions | 6 × 2.5 × 0.75 in |
| Product Type | |
| Max Cut | 15AWG |
| Application | Cable, Electrical, Electronics, Jewelry Making – Repair, Wire Harness |
| Cut Edge | |
| Cutter Type | Oval Relief Head |
| Handle Type | Ergonomic |
| Wire Size | 32-15 AWG |
BT SH-123
HAKO PN2005
BT SH-20H
AS 94-0120
EREM EROP00SA
BT SH-20G
BT SH-141
AB 10529
GT SPC600
BT SH-20E